Designed for Z-stacking of lithium battery cells, automatically stacking cathode, anode and separator. Equipped with a separator tension control system; a cylinder drives the separator's reciprocating movement for Z-fold stacking. Cantilever structure facilitates operation. Compared with manual stackers, it features high stacking efficiency, neat lamination and wide size compatibility, ideal for lab sample preparation and small-batch trial production.

Key Features

Simple adjustment, operation and maintenance.
Wide applicable range of cell stacking dimensions.
Simplified tension control system.
Automatic counting and zero-reset function.
Auto memory of last process parameters after power-off or standby.
Broad compatibility with various battery sizes.
Cylinder actuation controlled by foot switch.
High working efficiency with digital timer display.

Technical Specifications

Stacking Precision	Alignment tolerance better than ±0.5 mm
Stacking Size (Minimum, including tab length)	L44 × W44 mm (pressing plate replacement required for smaller sizes)
Stacking Size (Maximum, including tab length)	L200 × W150 mm (tabs on long side)
Max Stack Thickness	12 mm (adjustment plate replacement required for thicker stacks)
Max Separator Roll Outer Diameter	200 mm
Overall Dimension	L580 × W600 × H730 mm
Net Weight	Approx. 57 kg
Power Supply	Single-phase AC220V ±10% (AC110V customizable), 50/60 Hz, Rated Power 100 W
Compressed Air Pressure	0.4–0.6 MPa