The all-PTFE photoelectrochemical cell with sample holder (standard) places sheet photoelectrodes directly opposite the light window. The sample is pressed against a 1 cm² defined-area opening by a screw on the back and seals the cell at this opening. Non-standard sample sizes can be used as long as they cover the opening; the opening size can be customized. The PTFE body offers almost universal chemical resistance and can be used up to 260 °C. It is a safe choice for electrolytes containing HF or strong alkali, which attack glass and quartz.
The counter and reference electrodes must be 6 mm shaft, long-type electrodes. The PTFE inner core of the lid rotates 360° for alignment, electrode feedthroughs are sealed with O-ring screws and a sub-surface sparger is fitted.
In the standard-sealed cell, the lid and electrode feedthroughs are closed with O-rings and sealing screws. An oxygen-free atmosphere is maintained by purging with nitrogen or argon. It is not intended for vacuum or pressure.
| Cell type | Photoelectrochemical cell with sample holder, standard-sealed |
| Body | PTFE |
| Test area | 1 cm² (custom on request) |
| Sample fixing | Pressed by rear screw |
| Window | Quartz, > 95% transmittance |
| Volume options | 50 mL, 100 mL, 150 mL, 200 mL, 250 mL, 500 mL |
| Not included | Electrodes and membrane (sold separately) |
Electrodes and membranes shown in the photos are for illustration only and are not included in the price. Compatible reference, counter and working electrodes and membranes are available in the Electrodes category of our site.
For volumes, dimensions or port layouts other than those listed, you can request a custom-made quotation through the Quotation Form.
Türkçe
Engilish
