This H-type photoelectrochemical cell with single quartz window adapts the two-compartment membrane setup to light-driven photoelectrodes. The cathode and anode compartments are separated by an ion exchange membrane. This keeps products formed at one electrode from crossing to the other electrode and reacting again, and lets you control the electrolyte, pH and gas atmosphere of each compartment independently. The quartz light window has a light transmittance above 95% (manufacturer data). It is held by a locking ring that keeps the seal while allowing the quartz glass to be replaced quickly.
The flanges of the two compartments are joined with a chain clamp; opening the clamp lets you change the membrane in minutes. The reference electrode sits in the same compartment as the working electrode, which reduces the ohmic (iR) drop in solution. The PTFE inner core of the lid rotates 360° so the working electrode can be aligned exactly with the light window; tightening the outer POM cap then seals the cell.
In the standard-sealed cell, the lid and electrode feedthroughs are closed with O-rings and sealing screws. An oxygen-free atmosphere is maintained by purging with nitrogen or argon. It is not intended for vacuum or pressure.
The body is made of borosilicate glass 3.3, which has low thermal expansion (3.3 × 10⁻⁶ K⁻¹) and the highest resistance classes against water (HGB 1) and acids (S 1). Avoid sudden temperature differences above 120 °C to reduce the risk of breakage.
In the jacketed (double-layer) version an outer water jacket surrounds the inner cell. Water from a circulating thermostatic bath flows through the jacket via hose connections and keeps the electrolyte at a constant temperature during the measurement.
| Cell type | H-type membrane photoelectrochemical cell, standard-sealed |
| Temperature control | Water jacket for a circulating thermostatic bath |
| Body | Borosilicate glass 3.3 |
| Window | 1 quartz window, > 95% transmittance |
| Compartment joint | Flange + chain clamp, membrane supplied by user |
| Electrodes | Long type required |
| Volume options | 30 mL, 50 mL, 100 mL, 150 mL, 200 mL, 250 mL |
| Not included | Electrodes and membrane (sold separately) |
A sampling port can optionally be added to the cell body; please mention it in your quotation request.
Electrodes and membranes shown in the photos are for illustration only and are not included in the price. Compatible reference, counter and working electrodes and membranes are available in the Electrodes category of our site.
For volumes, dimensions or port layouts other than those listed, you can request a custom-made quotation through the Quotation Form.
Türkçe
Engilish
