Side-illuminated single-chamber photoelectrochemical cell is designed for testing photoelectrodes with horizontal light through a quartz window mounted on the side of the borosilicate glass body. The quartz light window has a light transmittance above 95% (manufacturer data). It is held by a locking ring that keeps the seal while allowing the quartz glass to be replaced quickly.
The PTFE inner core of the lid rotates 360° so the working electrode can be aligned exactly with the light window; tightening the outer POM cap then seals the cell. Electrode feedthroughs are sealed with O-ring screws and a sub-surface sparger controls the atmosphere. Electrode shafts must be the long type to suit the height of the cell.
The body is made of borosilicate glass 3.3, which has low thermal expansion (3.3 × 10⁻⁶ K⁻¹) and the highest resistance classes against water (HGB 1) and acids (S 1). Avoid sudden temperature differences above 120 °C to reduce the risk of breakage.
The single-layer body is a simple, economical choice for routine measurements at room temperature. If temperature control is needed, choose the jacketed version of the same cell.
| Cell type | Single-chamber photoelectrochemical cell, standard-sealed |
| Temperature control | None (jacketed version available as a separate product) |
| Body | Borosilicate glass 3.3 |
| Window | Quartz, > 95% transmittance, locking ring |
| Lid | 360° rotating PTFE core + POM outer cap |
| Volume options | 50 mL, 100 mL, 150 mL |
| Not included | Electrodes (sold separately) |
Electrodes and membranes shown in the photos are for illustration only and are not included in the price. Compatible reference, counter and working electrodes and membranes are available in the Electrodes category of our site.
For volumes, dimensions or port layouts other than those listed, you can request a custom-made quotation through the Quotation Form.
Türkçe
Engilish
