The small-volume H-type photoelectrochemical cell is a membrane glass cell with a single quartz window, working with about 10 mL of electrolyte per compartment. The cathode and anode compartments are separated by an ion exchange membrane. This keeps products formed at one electrode from crossing to the other electrode and reacting again, and lets you control the electrolyte, pH and gas atmosphere of each compartment independently. The quartz light window has a light transmittance above 95% (manufacturer data). It is held by a locking ring that keeps the seal while allowing the quartz glass to be replaced quickly.
The flanges of the two compartments are joined with a chain clamp; opening the clamp lets you change the membrane in minutes. The reference electrode sits in the same compartment as the working electrode, which reduces the ohmic (iR) drop in solution. Electrode feedthroughs are sealed with O-ring screws. There is no jacketed version of this cell.
In the standard-sealed cell, the lid and electrode feedthroughs are closed with O-rings and sealing screws. An oxygen-free atmosphere is maintained by purging with nitrogen or argon. It is not intended for vacuum or pressure.
The body is made of borosilicate glass 3.3, which has low thermal expansion (3.3 × 10⁻⁶ K⁻¹) and the highest resistance classes against water (HGB 1) and acids (S 1). Avoid sudden temperature differences above 120 °C to reduce the risk of breakage.
| Cell type | Small-volume H-type photoelectrochemical cell |
| Volume | 10 mL per compartment |
| Body | Borosilicate glass 3.3 |
| Window | 1 quartz window, > 95% transmittance |
| Type options | Single-Layer, Single-Layer with Sampling Port |
| Not included | Electrodes and membrane (sold separately) |
Electrodes and membranes shown in the photos are for illustration only and are not included in the price. Compatible reference, counter and working electrodes and membranes are available in the Electrodes category of our site.
For volumes, dimensions or port layouts other than those listed, you can request a custom-made quotation through the Quotation Form.